

中文 EN

PGZ-800 Portable Turbidity Meter

Category:

Portable Instrumentation

The PGZ-800 portable nephelometer works by emitting a beam of light into the sample, and then its built-in detector measures the intensity of the scattered light in the sample due to turbidity, which is at a 90° angle to the incident light. Since the scattered light intensity is directly proportional to the turbidity concentration in the water sample, the turbidity content in the sample can be measured more accurately.

Back to List Online Consultation

产品描述

Product Introduction

PGZ-800 portable nephelometer works by emitting a beam of light into the sample, and then its built-in detector measures the intensity of the scattered light in the sample due to turbidity, which is at a 90° angle to the incident light. Since the scattered light intensity is directly proportional to the turbidity concentration in the water sample, the turbidity content in the sample can be measured more accurately.

Key Features

Dual light sources, one instrument can be easily switched through software; and the design complies with EPA180.1 and IS07027 standards;
Five-point long-lasting turbidity calibration standard solution is standard;
It has IP66 protection level and good waterproof and dustproof performance;

Support NTU, FTU, EBC multi-unit switching;
Built-in water turbidity curve, users can use it directly. Support 2-5 point calibration, factory calibration and other data calibration methods;
Long-life light source as standard;

Support lithium battery power, standard with a large battery capacity of 5200mAh;
It has standard measurement and continuous measurement modes. It has a standard single measurement function, and also supports continuous measurement and stores data according to the set storage interval;
Built-in clock memory storage system supports storing measurement and calibration data;

Built-in large-capacity memory card, which can store and recall more than 10 million+ sets of measurement data for a long time.

Application Scenarios

Pure water plants, tap water plants, domestic sewage treatment plants;
Environmental protection departments, industrial water, pharmaceutical industry, epidemic prevention departments, hospitals, etc.

主机参数指标

测量原理	90°散射光
双光源	IS0/EPA方法，同台仪器通过软件操控即可实现设计符合EPA180.1和IS07027标准
量程	0-1000NTU
分辨率	0.001-0.1NTU
重复性	≤2%
示值误差	±5%或±0.1NTU，取最大值
零点漂移	±0.05%F.S
校准标准	最多支持5点标液校准
单位模式	出厂时设置为:NTU;可切换为FTU、EBC等
数据记录	可长期储存和调用超1000万+组测量数据
材质	ABS+PC
存储温度	-15-60°C
环境湿度	0-90%(无冷凝)
工作温度	1-45°C
工作电源	内置可充电锂电池，超大容量5200mAh
工作条件	仪器应水平放置在平稳的实验台上，有效的避开直射光线
	仪器周围应留有足够的空间以利散热，且无强烈震动源及强磁场干扰
	周围空气中应无明显灰尘及腐蚀性气体存在
防护等级	IP66
尺寸，重量	尺寸：248.58761.5mm；重量：约600g
标准配置	便携式浊度计/标液/电源适配器/试样瓶/说明书/合格证/便携手提箱等

1 / 1

Visualizações:

1000

PGZ-800 Portable Turbidity Meter

Preço de varejo

0.0

Yuan

Preço de mercado

0.0

Yuan

Visualizações:

1000

Número do produto

Classificação

Portable Instrumentation

Quantidade

Estoque:



Descrição de produto

Product Introduction

Key Features

Dual light sources, one instrument can be easily switched through software; and the design complies with EPA180.1 and IS07027 standards;
Five-point long-lasting turbidity calibration standard solution is standard;
It has IP66 protection level and good waterproof and dustproof performance;

Support NTU, FTU, EBC multi-unit switching;
Built-in water turbidity curve, users can use it directly. Support 2-5 point calibration, factory calibration and other data calibration methods;
Long-life light source as standard;

Support lithium battery power, standard with a large battery capacity of 5200mAh;
It has standard measurement and continuous measurement modes. It has a standard single measurement function, and also supports continuous measurement and stores data according to the set storage interval;
Built-in clock memory storage system supports storing measurement and calibration data;

Built-in large-capacity memory card, which can store and recall more than 10 million+ sets of measurement data for a long time.

Application Scenarios

Pure water plants, tap water plants, domestic sewage treatment plants;
Environmental protection departments, industrial water, pharmaceutical industry, epidemic prevention departments, hospitals, etc.

主机参数指标

测量原理	90°散射光
双光源	IS0/EPA方法，同台仪器通过软件操控即可实现设计符合EPA180.1和IS07027标准
量程	0-1000NTU
分辨率	0.001-0.1NTU
重复性	≤2%
示值误差	±5%或±0.1NTU，取最大值
零点漂移	±0.05%F.S
校准标准	最多支持5点标液校准
单位模式	出厂时设置为:NTU;可切换为FTU、EBC等
数据记录	可长期储存和调用超1000万+组测量数据
材质	ABS+PC
存储温度	-15-60°C
环境湿度	0-90%(无冷凝)
工作温度	1-45°C
工作电源	内置可充电锂电池，超大容量5200mAh
工作条件	仪器应水平放置在平稳的实验台上，有效的避开直射光线
	仪器周围应留有足够的空间以利散热，且无强烈震动源及强磁场干扰
	周围空气中应无明显灰尘及腐蚀性气体存在
防护等级	IP66
尺寸，重量	尺寸：248.58761.5mm；重量：约600g
标准配置	便携式浊度计/标液/电源适配器/试样瓶/说明书/合格证/便携手提箱等