

中文 EN

PLM-800 Waterproof Multi-Parameter Measurement and Control Terminal

Category:

Smart IoT

PLM-800 waterproof multi-parameter measurement and control terminal is a micro-power, multi-functional, and system solution suitable for measurement and control in manhole environment that integrates data acquisition, data communication and monitoring. It adopts an integrated modular design that effectively integrates RTU wireless transmission terminal and disposable lithium sub-battery. It can optionally have built-in radar level, and can support pH, conductivity, dissolved oxygen, ammonia nitrogen, COD, turbidity, SS, liquid level, flow, and up to 6 MODBUS485 sensors to meet the needs of water quality and water level monitoring in manholes and other complex situations.

Back to List Online Consultation

产品描述

Product Introduction

Key Features

Optional external 7-15VDC power supply;
Integrated design, compact structure, improve equipment stability, reliability and accuracy;
IP68 protection level design, moisture-proof and corrosion-resistant, suitable for installation requirements under a variety of environmental conditions;

Quick and easy installation, no need to go down the well, easy to disassemble;
The equipment has a working status indicator light, which is convenient to judge the operating status of the equipment on site;
The host adopts a micropower design with a sleep current ≤50uA;

Adopting MODBUS standard communication protocol, there is strong expansion space, which can be expanded to up to 6 MODBUS signal inputs, and different channels support access to different baud rate sensor inputs;
A non-contact radar level measurement system can be integrated internally to effectively reduce the interference of harsh water environment and achieve maintenance-free.

Application Scenarios

Monitoring of water quality and water level in inspection wells, drainage outlets and other occasions;
It can be used to monitor urban waterlogging.

主机参数指标

通讯协议	无线通讯方式：NB-loT；通讯协议：标准MODBUS RS485
电源	采用一次性锂亚电池，默认14.4V,114AH 支持外接电源供电，外部扩展电压：7-15VDC都可接入为设备供电
使用寿命	默认14.4V,114AH,一次性锂亚电池，搭配雷达和静压液位计，采集15分钟/次，上传2小时/次，可使用3年以上
硬件接口	一个USB调试接口三个传感器接口，最多支持6路MODBUSRS485传感器一个外部电源供电接口
对外供电	电压：5VDC或7-15VDC二选一
防护等级	IP68
材质	尼龙+玻纤
工作温度	-15-65°C(不结冰)
存储温度	-15-65°C
尺寸	255162196mm(长宽高)

1 / 1

Visualizações:

1000

PLM-800 Waterproof Multi-Parameter Measurement and Control Terminal

Preço de varejo

0.0

Yuan

Preço de mercado

0.0

Yuan

Visualizações:

1000

Número do produto

Classificação

Smart IoT

Quantidade

Estoque:



Descrição de produto

Product Introduction

Key Features

Optional external 7-15VDC power supply;
Integrated design, compact structure, improve equipment stability, reliability and accuracy;
IP68 protection level design, moisture-proof and corrosion-resistant, suitable for installation requirements under a variety of environmental conditions;

Quick and easy installation, no need to go down the well, easy to disassemble;
The equipment has a working status indicator light, which is convenient to judge the operating status of the equipment on site;
The host adopts a micropower design with a sleep current ≤50uA;

Adopting MODBUS standard communication protocol, there is strong expansion space, which can be expanded to up to 6 MODBUS signal inputs, and different channels support access to different baud rate sensor inputs;
A non-contact radar level measurement system can be integrated internally to effectively reduce the interference of harsh water environment and achieve maintenance-free.

Application Scenarios

Monitoring of water quality and water level in inspection wells, drainage outlets and other occasions;
It can be used to monitor urban waterlogging.

主机参数指标

通讯协议	无线通讯方式：NB-loT；通讯协议：标准MODBUS RS485
电源	采用一次性锂亚电池，默认14.4V,114AH 支持外接电源供电，外部扩展电压：7-15VDC都可接入为设备供电
使用寿命	默认14.4V,114AH,一次性锂亚电池，搭配雷达和静压液位计，采集15分钟/次，上传2小时/次，可使用3年以上
硬件接口	一个USB调试接口三个传感器接口，最多支持6路MODBUSRS485传感器一个外部电源供电接口
对外供电	电压：5VDC或7-15VDC二选一
防护等级	IP68
材质	尼龙+玻纤
工作温度	-15-65°C(不结冰)
存储温度	-15-65°C
尺寸	255162196mm(长宽高)