

中文 EN

PCM300-TP Total Phosphorus Water Quality Online Automatic Monitor

Category:

Organic Nutrient Online Analyzer

Ammonium molybdate spectrophotometry. The aqueous sample is digested with potassium persulfate, and all the phosphorus contained in it is converted into orthophosphate. In an acidic medium, orthophosphate forms a colored complex with a developer and reducing agent. Its absorbance is measured at a specific wavelength, which is proportional to the concentration of total phosphorus.

Back to List Online Consultation

产品描述

Measurement Principle

Key Features

The ten-way valve with sapphire valve core has high wear resistance coefficient, strong acid and alkali resistance, organic solvent resistance, strong service life and high stability;
The special design of the reference method does not affect the measured value of the light displacement of the digestion tank and the light pollution of the digestion cell;
It has the function of separating waste liquid, which realizes the separate discharge of high-concentration reaction waste liquid and low-concentration cleaning waste liquid;

It has a dynamic dilution function, which can automatically adjust the dilution factor according to the range set on site;
It has built-in quality control functions such as spike recovery, blank test, standard sample verification, zero point verification, span verification, parallel sample testing, etc., and can realize automatic, manual, remote and other ways to start quality control functions;
It has the functions of automatic fault diagnosis and abnormal information upload and recording, such as component failure, over-range alarm, over-standard alarm, reagent deficiency alarm and other information;

With overheating protection: if the heating temperature is too high, the heater will automatically power off;
After abnormal reset and power failure, the instrument automatically discharges the residual reactants in the instrument and automatically returns to the initial working state. With power-on alarm function, the instrument will generate alarm information when the power is re-powered after power off;
It has the functions of analytical instrument process log, measurement data recording and alarm information storage, and can be stored for more than 5 years by recording data calculation every hour, and can quickly export data from a USB flash drive;

It has three levels of administrative permissions.

Application Scenarios

On-line monitoring of total phosphorus in drinking water and surface water;
Online monitoring of municipal sewage import and export, pollution source discharge outlets, and total phosphorus at industrial wastewater outlets.

技术参数

量程	0-100mg/L（可定制）
示值误差	≤±5%或≤±0.005mg/L，取⼤者
重复性	≤2%
定量下限	≤0.02mg/L
分辨率	0.0001mg/L（小数点位数2-4位可设置）
显示	7寸触摸屏
测量模式	连续模式、周期模式（1h-30d可调）、定点模式、受控模式、手动模式可选
校准模式	手动校准和⾃动校准两种模式
维护周期	⼀般每月⼀次
电源	220VAC±10%，50HZ±10%
输出	4-20mA输出
通讯方式	MODBUS RS-232、RS-485、RJ45
环境条件	温度可调的室内，建议温度+5-40℃；湿度≤85%（不结露）
尺寸	5203901475mm（长宽高）

1 / 1

Visualizações:

1000

PCM300-TP Total Phosphorus Water Quality Online Automatic Monitor

Preço de varejo

0.0

Yuan

Preço de mercado

0.0

Yuan

Visualizações:

1000

Número do produto

Classificação

Organic Nutrient Online Analyzer

Quantidade

Estoque:



Descrição de produto

Measurement Principle

Key Features

The ten-way valve with sapphire valve core has high wear resistance coefficient, strong acid and alkali resistance, organic solvent resistance, strong service life and high stability;
The special design of the reference method does not affect the measured value of the light displacement of the digestion tank and the light pollution of the digestion cell;
It has the function of separating waste liquid, which realizes the separate discharge of high-concentration reaction waste liquid and low-concentration cleaning waste liquid;

It has a dynamic dilution function, which can automatically adjust the dilution factor according to the range set on site;
It has built-in quality control functions such as spike recovery, blank test, standard sample verification, zero point verification, span verification, parallel sample testing, etc., and can realize automatic, manual, remote and other ways to start quality control functions;
It has the functions of automatic fault diagnosis and abnormal information upload and recording, such as component failure, over-range alarm, over-standard alarm, reagent deficiency alarm and other information;

With overheating protection: if the heating temperature is too high, the heater will automatically power off;
After abnormal reset and power failure, the instrument automatically discharges the residual reactants in the instrument and automatically returns to the initial working state. With power-on alarm function, the instrument will generate alarm information when the power is re-powered after power off;
It has the functions of analytical instrument process log, measurement data recording and alarm information storage, and can be stored for more than 5 years by recording data calculation every hour, and can quickly export data from a USB flash drive;

It has three levels of administrative permissions.

Application Scenarios

On-line monitoring of total phosphorus in drinking water and surface water;
Online monitoring of municipal sewage import and export, pollution source discharge outlets, and total phosphorus at industrial wastewater outlets.

技术参数

量程	0-100mg/L（可定制）
示值误差	≤±5%或≤±0.005mg/L，取⼤者
重复性	≤2%
定量下限	≤0.02mg/L
分辨率	0.0001mg/L（小数点位数2-4位可设置）
显示	7寸触摸屏
测量模式	连续模式、周期模式（1h-30d可调）、定点模式、受控模式、手动模式可选
校准模式	手动校准和⾃动校准两种模式
维护周期	⼀般每月⼀次
电源	220VAC±10%，50HZ±10%
输出	4-20mA输出
通讯方式	MODBUS RS-232、RS-485、RJ45
环境条件	温度可调的室内，建议温度+5-40℃；湿度≤85%（不结露）
尺寸	5203901475mm（长宽高）