PCM200-TMn Total Manganese Water Quality Online Automatic Monitor
Formaldehyde oxime spectrophotometry. After the water sample is digested, the divalent manganese ions in the water sample are oxidized by dissolved oxygen to tetravalent manganese ions and the color developer under alkaline conditions to form a reddish-brown complex, and the color change is directly proportional to the manganese content in the sample solution. Its absorbance is measured at a specific wavelength, and the concentration of manganese in the water sample is calculated.
- The ten-way valve with sapphire valve core has high wear resistance coefficient, strong acid and alkali resistance, organic solvent resistance, strong service life and high stability;
- The special design of the reference method does not affect the measured value of the light displacement of the digestion tank and the light pollution of the digestion cell;
- It has the function of separating waste liquid, which realizes the separate discharge of high-concentration reaction waste liquid and low-concentration cleaning waste liquid;
- It has a dynamic dilution function, which can automatically adjust the dilution factor according to the range set on site;
- It has built-in quality control functions such as spike recovery, blank test, standard sample verification, zero point verification, span verification and parallel sample testing, and can realize automatic, manual, remote and other ways to start quality control functions;
- It has the functions of automatic fault diagnosis and abnormal information upload and recording, such as component failure, over-range alarm, over-standard alarm, reagent deficiency alarm and other information;
- With overheating protection: if the heating temperature is too high, the heater will automatically power off;
- After abnormal reset and power failure, the instrument automatically discharges the residual reactants in the instrument and automatically returns to the initial working state. With power-on alarm function, the instrument will generate alarm information when the power is re-powered after power off;
- It has the functions of analytical instrument process log, measurement data recording and alarm information storage, and can be stored for more than 5 years by recording data calculation every hour, and can quickly export data from a USB flash drive;
- It has three levels of administrative permissions.
- Online monitoring of manganese concentration in tap water, drinking water, and surface water;
- Online monitoring of manganese concentration in municipal sewage import and export, industrial and industrial wastewater outlets, and pollution source discharge outlets.
| 量程 | 0-10mg/L(可定制) | |
| 示值误差 | ≤±5% | |
| 重复性 | ≤2% | |
| 分辨率 | 0.0001mg/L(小数点位数2-4位可设置) | |
| 显示 | 7寸触摸屏 | |
| 测量模式 | 连续模式、周期模式(1h-30d可调)、定点模式、受控模式、手动模式可选 | |
| 校准模式 | 手动校准和自动校准两种模式 | |
| 维护周期 | 一般每月一次 | |
| 电源 | 220VAC±10%,50HZ±10% | |
| 输出 | 4-20mA输出 | |
| 通讯方式 | MODBUS RS-232,RS-485,RJ45 | |
| 环境条件 | 温度可调的室内,建议温度+5-40°C;湿度≤85%(不结露) | |
| 尺寸 | 302*271*462mm(长*宽*高) | |
Related Cases
Customer Service Hotline
400-691-3118
Address: 4th Floor, Industrial Building, No. 170 Jinyan Road, Jianxin Town, Cangshan District, Fuzhou City, Fujian Province
Email: liuhailong@probest.cn
WeChat Official Account
Copyright © Fuzhou Probest Intelligent Technology Co., Ltd. All rights reserved | Powered by 233 Technology